Xbee

Specials

No special products at this time.

Viewed products

XBee Module - Series 1 - 1mW with Wire Antenna - XB24-AWI-001

This product is no longer in stock

350312

New product

KWD 12.000

Original From Adafruit

More details

  • Send to a friend

    Send to a friend

    XBee Module - Series 1 - 1mW with Wire Antenna - XB24-AWI-001

    XBee Module - Series 1 - 1mW with Wire Antenna - XB24-AWI-001

    Original From Adafruit

    Recipient :

    * Required fields

      or  Cancel

  • Print

product description

This is our most popular XBee wireless module: the series 1 802.15.4 protocol 1mW with wire antenna. Its good for point-to-point, multipoint and convertible to a mesh network point. We suggest this module for those starting out as it is the easiest to get going: if there are two XBees in the same area they will automatically 'sync' and pass serial data back and forth without any additional work or configuration

What we like about the Series 1 modules is that they are so easy to get set up. If you have two in range, they will automatically form a serial link with no configuration, so you can send TTL serial data back and forth. You can also configure the baudrate, as well as sleep modes, power modes and tons more stuff using the Digi XBee tool.

The pins on an XBee are 2mm spacing, not 0.1" so they will not fit into a breadboard. For that reason, they work best in our XBee adapter module kit (which has a 250mA 3.3V regulator) or with the USB XBee adapter.

This module comes with a wire antenna, its the same price as a chip antenna but 50% more range because of the improved antenna, awesome!

Technical Details

Details:

  • Dimensions: 27mm x 24mm x 9mm (1in x 0.9in x 0.3in)
  • 4g ( 0.15oz)

Downloads:

This handy chart from Digi shows the differences between all of the different XBees in the family

Related products

TOP