Wifi

Specials

No special products at this time.

ESP8266 WiFi Web Server Shield NodeMCU for Arduino Uno, Mega2560 similar CC3000

350019

New product

KWD 6.000

  • Send to a friend

    Send to a friend

    ESP8266 WiFi Web Server Shield NodeMCU for Arduino Uno, Mega2560 similar CC3000

    ESP8266 WiFi Web Server Shield NodeMCU for Arduino Uno, Mega2560 similar CC3000

    Recipient :

    * Required fields

      or  Cancel

  • Print

product description

Features

·         WiFi module is industrial-grade chips ESP8266, which is ESP-12E with metal shield, strong anti-interference ability;

·         Shield is pin-compatible with Arduino Uno, Mega2560 and other control boards that have a compatible pin interface. A voltage converter chip is used to deal with 3.3V (Esp8266) and 5V (Arduino);

·         Dual DIP switches are used for serial ports so that this module shield can be used stand alone as an Arduino Uno expansion board, and also be used as ESP8266 expansion board;

·         Serial data is transported to WiFi device transparently, and vice versa.  Arduino programs do not need any configuration;

·         WebServer is developed to configure WiFi parameters and serial port parameters;

·         The module shield can be used as an independent ESP8266 development board. for instance, downloading the official AT commands firmware, NodeMCU open source firmware can be used;

·         The module shield also can be used as stand-alone expansion board for Arduino Uno R3.

 

For more references about Doit serial WiFi module expansion board, driver board information, please refer to:

Technical Specifications

·         802.11 b / g / n wireless standards;

·         STA / AP modes support ;

·         TCP / IP protocol stack, One socket;

·         Supports standard TCP / UDP Server and Client;

·         Supports serial port baud rate configuration: 

·         1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;

·         Supports serial data bits: 5/6/7/8 bits;

·         Supports serial parity: none;

·         Supports serial stop bits: 1/2 bit;

·         Pin-compatible with Arduino UNO, Mega;

·         Arduino Pinout 2/3/4/5/6/7/8/9/10/11/12/13;

·         ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / UART TX / UART RX;

·         KEY button: modes configuration;

·         Dual-Ports DIP switches: switching Arduino and ESP8266;

·         WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), idle mode:<200ua;

·         Serial WiFi transmission rate: 110-460800bps;

·         Temperature: -40 ~ + 125deg;

·         Humidity: 10%-90% non-condensing;

·         Weight: about 20g;

 

Related products

TOP